Start by laying the frame out in a space that will accomodate the size. An open floor space is ideal.
Snap open all sections of the frame. You may need help for the longer sections.


Insert the four (4) connectors into the two short lengths.
One on each end as shown.
Note: You may need to back the screws out slightly.


Tighten the screws until secure. Do no not overtighten.


Insert one of the short section into both long sections.
One on each side of the short section.
Tighten the screws until secure. Do not overtighten.
Repeat with the 2nd short section on the other end of the frame.

Mount your frame using the provided holes and appropriate mounting hardware.
The screws and wall anchors provided with the frame can be used on most walls.

Insert your graphic and snap the sides closed.